Stainless Steel Lighting Electrical Hardware

The fixture must match the vessel or system’s nominal supply voltage. A 12V fixture must not be connected directly to a 24V supply unless an approved converter is used. Confirm voltage, polarity, current draw and compatible controls before wiring.

These names identify different compact LED light families and light-output configurations. Compare the family image, mounting style, dimensions, voltage and available colors to select the correct model.

Stalk lights project from the mounting surface on a specified-length stem. Back- and face-mount versions differ in how the fixture attaches and where hardware is accessed. Bulkhead and ball styles provide different housings and aiming or installation profiles. Confirm clearance and mounting details on the product page.

Choose blue, green, red, white or yellow according to the intended illumination and vessel requirements. Color alone does not establish whether a fixture is approved for navigation, emergency or regulatory signaling.

A connector terminates conduit at compatible equipment or an enclosure. A coupling joins compatible conduit sections. An elbow connector changes direction while making the connection. Verify the thread, conduit type and nominal size at both ends.

Match the fitting to the conduit’s exact nominal size and thread or connection system. This category includes families covering 3/8, 1/2, 3/4, 1 and 1-1/4 inch sizes, but availability differs by fitting style.

No. Stainless steel improves corrosion resistance but does not by itself establish an enclosure or ingress-protection rating. Use appropriate seals, cable entries, enclosures and installation methods for the environment.

Use a transformer only when it is specifically compatible with the selected lights, input supply and total connected load. Confirm input and output ratings, capacity, installation location and required protection before use.

Installation should follow the product instructions and applicable marine and electrical requirements. Isolate the supply, provide correctly sized conductors and circuit protection, protect connections from moisture and chafe, and use a qualified marine electrician when required.